Choose this product when
You need several hundred samples or multiple 96-well plates processed as one batch
High-Throughput Tissue Grinder
JXFSTPRP-576
An ultra-high-throughput tissue grinder for up to 576 samples, with nine 96-well plate positions and alternative tube or grinding-jar configurations.
Best forVery large batches and plate-based sample-preparation workflows
Maximum throughput576 samples
Plate capacity9 × 96-well plates
Frequency0–50 Hz
Rated power1100 W
Selection guide
Is this the right product?
Consider another route when
Your workload is below plate scale or you require active refrigerated chamber control as standard
Confirm plate or tube configuration, balance requirements, daily batch count and downstream extraction workflow.
Applications
Compatible samples
Plant and animal tissue
Microorganisms
Soil and minerals
Pharmaceutical samples
Polymers and materials
Processing method
Working principle
Parallel tube, plate or jar formats use oscillating grinding media for batch sample preparation.
- Prepare the sample01
Match material and vessel
- Process the sample02
Use the selected operating setup
- Collect the output03
Prepare for downstream analysis
Technical specifications
Technical specifications
Check the selected model and container configuration before ordering.
Shanghai Jingxin
JXFSTPRP-576
| Capacity & processing | |
|---|---|
| Maximum throughput | 576 samples |
| Final particle size | Approx. 5 μm |
| Temperature & operation | |
| Frequency | 0–50 Hz |
| Run time | 0–9999 s |
| Grinding modes | Wet, dry and low-temperature grinding |
| Safety / clamping | Automatic center-positioning clamp |
| Vessels & grinding tools | |
| Compatible formats | 9 × 96-well deep-well plates; 90 × 5 mL tubes; 72 × 7–15 mL tubes; 9 × 50 mL steel jars; 30 × 50 mL wear-resistant tubes |
| Grinding ball diameter | 0.1–30 mm |
| Grinding ball materials | Stainless steel, chrome steel, zirconia, tungsten carbide and quartz sand |
| Dimensions & electrical supply | |
| Rated power | 1100 W |
| Power supply | 220 V single-phase AC, <10 A |
| Dimensions | Approx. 580 × 470 × 700 mm |
| Noise level | <55 dB |
| Other specifications | |
| Grinding platforms | 30 |
| Clamp travel | 38 mm vertical |
Vessels & accessories
Vessels & accessories
Confirm included items and optional accessories in the itemized quotation.
Compatible formats
- 9 × 96-well deep-well plates
- 90 × 5 mL tubes
- 72 × 7–15 mL tubes
- 9 × 50 mL steel jars
- 30 × 50 mL wear-resistant tubes
Grinding ball diameter
0.1–30 mm
Grinding ball materials
Stainless steel, chrome steel, zirconia, tungsten carbide and quartz sand
Application examples
Application cases
Compare the sample, container, conditions and result with your own workflow.
Dried rice leaves · 96-well deep-well plate
High-throughput preparation of rice leaves
The experiment explicitly used JXFSTPRP-576 with steel balls in a 96-well deep-well plate to prepare rice leaves for a transgenic-testing workflow.
Read this case →Dried wheat · 50 mL PTFE jar
Dry grinding of wheat for analytical preparation
The experiment identifies JXFSTPRP-576 and records dry grinding at 45 Hz for 60 seconds, repeated twice, using a 50 mL PTFE jar.
Read this case →Corn kernels
Corn-kernel preparation for nitrogen analysis
The experiment identifies JXFSTPRP-576 and documents corn-kernel grinding before nitrogen-content measurement, using multiple groups to compare the preparation result.
Read this case →Product comparison
Compare related products
| Product | Capacity / configuration | Temperature |
|---|---|---|
| JXFSTPRP-576Current product | Up to 576 samples | Wet, dry and low-temperature workflows; cooling as an upgrade |
 | 3 model configurations | Pre-cooled / optional cooling |
 | 2 model configurations | Pre-cooled / optional cooling |
 | 1–192 samples, configuration dependent | Dry, wet or low-temperature grinding |
Common questions
Product FAQ
Which samples can JXFSTPRP-576 process?
Plant and animal tissue Microorganisms Soil and minerals Pharmaceutical samples Polymers and materials Match the preparation method to the material and downstream analysis.
What is the working capacity of JXFSTPRP-576?
Up to 576 samples. Capacity depends on the selected vessel, adapter and actual sample.
What temperature setup should I use?
Wet, dry and low-temperature workflows; cooling as an upgrade. Match the cooling setup to the sample and operating method.
What affects the quotation?
The selected model, vessels, compatible accessories, optional temperature-control equipment and destination electrical requirements determine the quotation. Request a model-specific configuration and itemized supply list.
Plan your purchase
Procurement & support
Confirm the instrument, accessories and destination requirements in one enquiry.
Installation requirements
- Electrical supply
- Confirm voltage, frequency, power, plug and grounding for the selected model.
- Bench and access
- Check dimensions, equipment weight, lid clearance and maintenance access.
- Cooling and handling
- Plan ventilation, protective equipment and coolant handling for the selected cooling method.
Documentation
Request documents for your model and destination market.
- Technical datasheet
- Operating manual
- Configuration list
Price & supply
Include sample type, amount, batch size, temperature requirements and delivery destination.
Request an itemized supply list with delivery, installation, training and warranty terms.
Request an itemized quote →Build your configuration
Match the equipment to your sample.
Discuss the model, operating setup and quotation with the application team.