Choose this product when
You need both refrigerated grinding and an integrated low-temperature pre-cooling stage
Cryogenic Grinder
JXFSTPRP-CLN-DT
A compressor-cooled grinder with an integrated low-temperature stage for sample pre-cooling and a grinding chamber adjustable from room temperature to −50 °C.
Best forWorkflows that need active grinding-chamber cooling plus a separate sample pre-cooling stage
Grinding chamberRoom temperature to −50 °C
Cold stageRoom temperature to −30 °C
Frequency0–70 Hz
Power500 W
Selection guide
Is this the right product?
Consider another route when
The workflow only needs chamber refrigeration or pre-cooled vessels
Confirm whether the separate cold stage is required by the protocol rather than selecting it from throughput alone.
Applications
Compatible samples
Plant tissue
Animal tissue and bone
Fungi and bacteria
Plastics and polymers
Volatile materials
Soil, food and pharmaceutical samples
Processing method
Working principle
Grinding media process samples inside a refrigerated chamber while the instrument controls the stated temperature range.
- Prepare the sample01
Match material and vessel
- Process the sample02
Use the selected operating setup
- Collect the output03
Prepare for downstream analysis
Technical specifications
Technical specifications
Check the selected model and container configuration before ordering.
Shanghai Jingxin
JXFSTPRP-CLN-DT
| Capacity & processing | |
|---|---|
| Final particle size | Approx. 5 μm |
| Temperature & operation | |
| Frequency | 0–70 Hz |
| Grinding modes | Wet, dry and low-temperature grinding |
| Run time | 0–9999 s |
| Grinding chamber temperature | Room temperature to −50 °C |
| Cold-stage temperature | Room temperature to −30 °C |
| Cooling method | Compressor cooling |
| Safety | Lid-open protection and automatic center-positioning clamp |
| Vessels & grinding tools | |
| Compatible formats | 24 / 32 / 48 / 64 × 0.2–0.5 mL; 24 / 32 / 48 / 64 / 96 × 2 mL; 4 / 12 / 24 × 5 mL; 8 × 10–15 mL; 2 × 25 mL; 2 × 50 mL; 2 × 96-well deep-well plates |
| Dimensions & electrical supply | |
| Noise level | <55 dB |
| Power supply | AC 220 V ±20 V, 50 Hz |
| Power | 500 W |
| Dimensions | 670 × 425 × 500 mm |
| Weight | 90 kg |
| Other specifications | |
| Stored parameter sets | 20 |
| Grinding platforms | At least 2 |
| Display | 7-inch touchscreen |
Vessels & accessories
Vessels & accessories
Confirm included items and optional accessories in the itemized quotation.
Compatible formats
- 24 / 32 / 48 / 64 × 0.2–0.5 mL
- 24 / 32 / 48 / 64 / 96 × 2 mL
- 4 / 12 / 24 × 5 mL
- 8 × 10–15 mL
- 2 × 25 mL
- 2 × 50 mL
- 2 × 96-well deep-well plates
Product comparison
Compare related products
| Product | Capacity / configuration | Temperature |
|---|---|---|
| JXFSTPRP-CLN-DTCurrent product | Up to 192 samples, adapter dependent | Grinding chamber: room temperature to −50 °C; cold stage: room temperature to −30 °C |
 | 5 model configurations | −50 °C to room temperature |
 | −30 °C to room temperature | −30 °C to room temperature |
 | Up to 192 samples, adapter dependent | Adjustable from −50 °C to room temperature |
Common questions
Product FAQ
Which samples can JXFSTPRP-CLN-DT process?
Plant tissue Animal tissue and bone Fungi and bacteria Plastics and polymers Volatile materials Soil, food and pharmaceutical samples Match the preparation method to the material and downstream analysis.
What is the working capacity of JXFSTPRP-CLN-DT?
Up to 192 samples, adapter dependent. Capacity depends on the selected vessel, adapter and actual sample.
What temperature setup should I use?
Grinding chamber: room temperature to −50 °C; cold stage: room temperature to −30 °C. Match the cooling setup to the sample and operating method.
What affects the quotation?
The selected model, vessels, compatible accessories, optional temperature-control equipment and destination electrical requirements determine the quotation. Request a model-specific configuration and itemized supply list.
Plan your purchase
Procurement & support
Confirm the instrument, accessories and destination requirements in one enquiry.
Installation requirements
- Electrical supply
- Confirm voltage, frequency, power, plug and grounding for the selected model.
- Bench and access
- Check dimensions, equipment weight, lid clearance and maintenance access.
- Cooling and handling
- Plan ventilation, protective equipment and coolant handling for the selected cooling method.
Documentation
Request documents for your model and destination market.
- Technical datasheet
- Operating manual
- Configuration list
Price & supply
Include sample type, amount, batch size, temperature requirements and delivery destination.
Request an itemized supply list with delivery, installation, training and warranty terms.
Request an itemized quote →Build your configuration
Match the equipment to your sample.
Discuss the model, operating setup and quotation with the application team.