Choose this product when
Active refrigeration and controlled multi-sample grinding are primary requirements
Cryogenic Grinder
JXFSTPRP-CLN
A refrigerated multi-sample grinder with adjustable chamber temperature from −50 °C to room temperature for grinding, homogenization, cell disruption and material preparation.
Best forParallel processing where active refrigeration and temperature control are required
Temperature range−50 °C to room temperature
Maximum throughputUp to 192 samples
Frequency0–70 Hz
Final particle sizeApprox. 5 μm
Selection guide
Is this the right product?
Consider another route when
Pre-cooling is sufficient or the workflow requires direct liquid-nitrogen immersion
Select the adapter from the actual tube, jar or plate format and confirm the required chamber temperature with the application team.
Applications
Compatible samples
Plant and animal tissue
Bacteria, yeast, fungi and spores
Soil, rock and minerals
Pharmaceutical samples
Polymers and other difficult materials
Processing method
Working principle
Grinding media process samples inside a refrigerated chamber while the instrument controls the stated temperature range.
- Prepare the sample01
Match material and vessel
- Process the sample02
Use the selected operating setup
- Collect the output03
Prepare for downstream analysis
Technical specifications
Technical specifications
Check the selected model and container configuration before ordering.
Shanghai Jingxin
JXFSTPRP-CLN
| Capacity & processing | |
|---|---|
| Maximum throughput | Up to 192 samples; 24- and 48-position liquid-nitrogen freezing adapters |
| Final particle size | Approx. 5 μm |
| Temperature & operation | |
| Temperature range | −50 °C to room temperature |
| Temperature accuracy | ±0.5 °C |
| Frequency | 0–70 Hz |
| Run time | 0–9999 s |
| Grinding modes | Wet, dry and low-temperature grinding |
| Stored programs | 20 custom programs |
| Vessels & grinding tools | |
| Compatible formats | 24 / 32 / 48 / 64 × 0.2–0.5 mL; 24 / 32 / 48 / 64 / 96 × 2 mL; 4 / 12 / 24 × 5 mL; 8 × 10–15 mL; 2 × 25 mL; 2 × 50 mL; 2 × 96-well deep-well plates |
| Grinding ball diameter | 0.1–30 mm |
| Grinding ball materials | Stainless steel, chrome steel, zirconia, tungsten carbide and quartz sand |
| Dimensions & electrical supply | |
| Noise level | <55 dB |
| Dimensions | 700 × 410 × 450 mm |
| Weight | 82.5 kg |
| Other specifications | |
| Applications | Tissue homogenization, grinding, cell disruption, dispersion, preparation and shaking |
| Grinding platforms | At least 2 |
Vessels & accessories
Vessels & accessories
Confirm included items and optional accessories in the itemized quotation.
Compatible formats
- 24 / 32 / 48 / 64 × 0.2–0.5 mL
- 24 / 32 / 48 / 64 / 96 × 2 mL
- 4 / 12 / 24 × 5 mL
- 8 × 10–15 mL
- 2 × 25 mL
- 2 × 50 mL
- 2 × 96-well deep-well plates
Grinding ball diameter
0.1–30 mm
Grinding ball materials
Stainless steel, chrome steel, zirconia, tungsten carbide and quartz sand
Application examples
Application cases
Compare the sample, container, conditions and result with your own workflow.
Poultry tissue · 3 g
120-second homogenization of poultry tissue
The experiment used JXFSTPRP-CLN with a steel-jar adapter and grinding media. After processing, the tissue was reported as a fine, uniform homogenate without obvious large particles, ready for subsequent extraction or analysis.
Read this case →Tumour tissue
Low-temperature preparation of tumour tissue
The experiment used JXFSTPRP-CLN under controlled low-temperature conditions to prepare tumour tissue for workflows such as RNA extraction while limiting heat exposure during grinding.
Read this case →Rabbit limb bone · 5 g
Rabbit limb-bone preparation for nucleic-acid extraction
The experiment paired JXFSTPRP-CLN with a 50 mL steel jar and a 10 mm stainless-steel ball. The jar was pre-cooled in liquid nitrogen before a repeated 50-second grinding program.
Read this case →Tomato leaves
Tomato-leaf preparation before RNA extraction
The experiment processed leaf material with grinding media and lysis solution in tubes. It identifies JXFSTPRP-CLN and reports complete grinding after a one-minute run, with the metal adapter pre-cooled for the RNA workflow.
Read this case →Product comparison
Compare related products
| Product | Capacity / configuration | Temperature |
|---|---|---|
| JXFSTPRP-CLNCurrent product | Up to 192 samples, adapter dependent | Adjustable from −50 °C to room temperature |
 | 5 model configurations | −50 °C to room temperature |
 | −30 °C to room temperature | −30 °C to room temperature |
 | Up to 192 × 2 mL deep-well tubes, format dependent | Adjustable from −50 °C to room temperature |
Common questions
Product FAQ
Which samples can JXFSTPRP-CLN process?
Plant and animal tissue Bacteria, yeast, fungi and spores Soil, rock and minerals Pharmaceutical samples Polymers and other difficult materials Match the preparation method to the material and downstream analysis.
What is the working capacity of JXFSTPRP-CLN?
Up to 192 samples, adapter dependent. Capacity depends on the selected vessel, adapter and actual sample.
What temperature setup should I use?
Adjustable from −50 °C to room temperature. Match the cooling setup to the sample and operating method.
What affects the quotation?
The selected model, vessels, compatible accessories, optional temperature-control equipment and destination electrical requirements determine the quotation. Request a model-specific configuration and itemized supply list.
Plan your purchase
Procurement & support
Confirm the instrument, accessories and destination requirements in one enquiry.
Installation requirements
- Electrical supply
- Confirm voltage, frequency, power, plug and grounding for the selected model.
- Bench and access
- Check dimensions, equipment weight, lid clearance and maintenance access.
- Cooling and handling
- Plan ventilation, protective equipment and coolant handling for the selected cooling method.
Documentation
Request documents for your model and destination market.
- Technical datasheet
- Operating manual
- Configuration list
Price & supply
Include sample type, amount, batch size, temperature requirements and delivery destination.
Request an itemized supply list with delivery, installation, training and warranty terms.
Request an itemized quote →Build your configuration
Match the equipment to your sample.
Discuss the model, operating setup and quotation with the application team.